Hyundai Ioniq 5: Heat pump refrigerant line fitting corrosion causing heating system failure
Heat pump refrigerant line fitting corrosion causing heating system failure is a common cooling fault on the Hyundai Ioniq 5 on the 2021 onward cars, and we rate it major. Putting it right costs ≈A$830 to ≈A$2,580 at independent workshop rates, shown as an approximate guide in Australian dollars. Below is what goes wrong, the symptoms to notice on a test drive, where to look, and what to ask the seller before you hand over any money. It is one of 13 documented faults on the Hyundai Ioniq 5.
- Vehicle
- Hyundai Ioniq 5
- Years
- 2021 onward
- Fuel
- ev
- Gearbox
- auto
- System
- Cooling
What you are looking at
No photograph available
What goes wrong
The Ioniq 5 NE shares the e-GMP platform heat pump system with the Kia EV6, and the same galvanic corrosion issue affects the aluminium refrigerant line fittings where they connect to dissimilar metal components. Refrigerant leaks progressively degrade heat pump output, with complete failure in winter leaving only energy-intensive resistive heating. Hyundai issued a TSB addressing refrigerant line inspection and replacement in AU markets. The issue was documented within 2–4 years of service on Australian examples.
What you would notice
- Insufficient cabin heating in cold weather
- Heat pump error message or warning light
- Battery range significantly reduced in winter (resistive heating compensating)
- Refrigerant loss indicated by system warning
How to check it
Where to look. Heat pump refrigerant lines at front of vehicle near HVAC module
Test heat pump operation on a cold day.
Verify the heater produces warm air quickly (heat pump is efficient and fast).
Request inspection of refrigerant line fittings for corrosion.
Check service records for TSB completion.
What it costs to put right
≈A$830 to ≈A$2,580 at independent workshop rates, shown as an approximate guide in Australian dollars. That is for this job on its own, not for the car.
Ask the seller
- “Has the heat pump refrigerant line TSB been completed by a Hyundai dealer?”
- “Any reduction in heating performance in winter?”
- “Has the refrigerant system been re-gassed?”
Now check the Hyundai Ioniq 5 you are actually looking at
Everything above is true of the model, and it is free. What it does not tell you is whether THIS car still has money owing on it, has been written off or reported stolen, what kms it showed in past sale ads, whether it has had accident repair claims and what it is worth today. That comes from the official records for that plate. Enter the plate and its state for the A$17.90 Vehicle Check, or the full history from A$24.99.
Where this comes from
Hyundai Ioniq 5 buyer questions
Is heat pump refrigerant line fitting corrosion causing heating system failure serious on a Hyundai Ioniq 5?
We rate it major and common on the Hyundai Ioniq 5. The Ioniq 5 NE shares the e-GMP platform heat pump system with the Kia EV6, and the same galvanic corrosion issue affects the aluminium refrigerant line fittings where they connect to dissimilar metal components. Refrigerant leaks progressively degrade heat pump output, with complete failure in winter leaving only energy-intensive resistive heating. Hyundai issued a TSB addressing refrigerant line inspection and replacement in AU markets. The issue was documented within 2–4 years of service on Australian examples.
How much does it cost to fix on a Hyundai Ioniq 5?
≈A$830 to ≈A$2,580 at independent workshop rates, shown as an approximate guide in Australian dollars. That figure is for this job on its own. A car showing the symptoms on this page is usually worth either walking away from or negotiating down by at least the repair figure.
Which Hyundai Ioniq 5 years are affected?
Our research records this fault on the 2021 onward Hyundai Ioniq 5. Build dates move around, especially on imported cars, so treat the range as the years to look hardest at rather than a guarantee either way. The official records tell you the exact build and first registration date for the car in front of you.
How do I check for it before I buy?
Test heat pump operation on a cold day. Verify the heater produces warm air quickly (heat pump is efficient and fast). Request inspection of refrigerant line fittings for corrosion. Check service records for TSB completion. Look here: Heat pump refrigerant lines at front of vehicle near HVAC module