Nissan AD Van: Rust in rear load area, tailgate and wheel arches (commercial life)
Rust in rear load area, tailgate and wheel arches (commercial life) is a common body & rust fault on the Nissan AD Van on the 2000–2020 cars, and we rate it major. Putting it right costs ≈A$460 to ≈A$2,760 at independent workshop rates, shown as an approximate guide in Australian dollars. Below is what goes wrong, the symptoms to notice on a test drive, where to look, and what to ask the seller before you hand over any money. It is one of 5 documented faults on the Nissan AD Van.
- Vehicle
- Nissan AD Van
- Years
- 2000–2020
- Fuel
- petrol
- System
- Body & Rust
What you are looking at
No photograph available
What goes wrong
AD Vans are commercial workhorses that carry loads, get scraped, and are often parked outside for years, so corrosion appears where the paint has been chipped by cargo and where water sits. The rear inner wheel arches, tailgate lower edge, load-floor seams and door bottoms are the usual spots. On a used import this rust can be a roadworthy fail if it is near a seatbelt anchor or structural seam, turning a cheap van into a certification headache.
What you would notice
- Bubbling paint on wheel arches, tailgate or door bottoms
- Flaking rust in the load floor seams
- Damp or musty load area
- Rust stains around the rear jack points
How to check it
Where to look. Rear inner wheel arches, tailgate lower edge, load-floor seams, door bottoms, rear sills
Lift the load-floor mat and check the metal underneath and the seams for scale.
Press the rear arches and tailgate lower lip with a thumb - crunchy or soft metal is structural rust.
Look underneath at the sills and rear jacking points.
Ask whether it will pass a fresh roadworthy as-is.
What it costs to put right
≈A$460 to ≈A$2,760 at independent workshop rates, shown as an approximate guide in Australian dollars. That is for this job on its own, not for the car.
Ask the seller
- “Does it have a current roadworthy certificate and any recent rust repairs?”
- “Has it been used for deliveries or trades work?”
Now check the Nissan AD Van you are actually looking at
Everything above is true of the model, and it is free. What it does not tell you is whether THIS car still has money owing on it, has been written off or reported stolen, what kms it showed in past sale ads, whether it has had accident repair claims and what it is worth today. That comes from the official records for that plate. Enter the plate and its state for the A$17.90 Vehicle Check, or the full history from A$24.99.
Where this comes from
- My Nissan Leaf Forum 'Rust question' thread (shared Nissan van platform)
Nissan AD Van buyer questions
Is rust in rear load area, tailgate and wheel arches (commercial life) serious on a Nissan AD Van?
We rate it major and common on the Nissan AD Van. AD Vans are commercial workhorses that carry loads, get scraped, and are often parked outside for years, so corrosion appears where the paint has been chipped by cargo and where water sits. The rear inner wheel arches, tailgate lower edge, load-floor seams and door bottoms are the usual spots. On a used import this rust can be a roadworthy fail if it is near a seatbelt anchor or structural seam, turning a cheap van into a certification headache.
How much does it cost to fix on a Nissan AD Van?
≈A$460 to ≈A$2,760 at independent workshop rates, shown as an approximate guide in Australian dollars. That figure is for this job on its own. A car showing the symptoms on this page is usually worth either walking away from or negotiating down by at least the repair figure.
Which Nissan AD Van years are affected?
Our research records this fault on the 2000–2020 Nissan AD Van. Build dates move around, especially on imported cars, so treat the range as the years to look hardest at rather than a guarantee either way. The official records tell you the exact build and first registration date for the car in front of you.
How do I check for it before I buy?
Lift the load-floor mat and check the metal underneath and the seams for scale. Press the rear arches and tailgate lower lip with a thumb - crunchy or soft metal is structural rust. Look underneath at the sills and rear jacking points. Ask whether it will pass a fresh roadworthy as-is. Look here: Rear inner wheel arches, tailgate lower edge, load-floor seams, door bottoms, rear sills