Skip to content
MajorCommonEngine

Suzuki Grand Vitara: J20A / J24B timing chain stretch

J20A / J24B timing chain stretch is a common engine fault on the Suzuki Grand Vitara on the 2005–2015 cars, and we rate it major. Putting it right costs ≈A$1,100 to ≈A$2,580 at independent workshop rates, shown as an approximate guide in Australian dollars. Below is what goes wrong, the symptoms to notice on a test drive, where to look, and what to ask the seller before you hand over any money. It is one of 23 documented faults on the Suzuki Grand Vitara.

Vehicle
Suzuki Grand Vitara
Engine
J20A / J24B
Years
2005–2015
Fuel
petrol
System
Engine

This page covers the Suzuki Grand Vitara as a model. Some faults only affect particular engines or build years — enter a plate below to narrow the list to one car.

All Suzuki Grand Vitara faults23 documented faults on this model

What you are looking at

The front of a dual overhead camshaft engine with the timing cover removed, exposing the timing chain and sprockets.Example of the part — not this vehicle

The front of a twin-cam engine with the timing cover off — chain, sprockets and guides.

Logansenf · CC BY-SA 4.0 · Wikimedia Commons

What goes wrong

The second-generation Grand Vitara (2005-2015) uses the J20A 2.0L or J24B 2.4L four-cylinder petrol engines, both chain-driven interference designs. The chain tensioner and plastic guide system wears gradually and is sensitive to oil change frequency. On examples that have had extended service intervals or have exceeded 150,000 km, the chain elongates enough to produce a rattle on cold start-up. A jumped tooth on these interference engines bends the valves, turning a preventable maintenance job into an engine rebuild costing more than the car's value. Multiple Grand Vitara owner forums in Australian cite this as the single most important mechanical item to verify at purchase.

What you would notice

  • Rattling on cold start that clears once oil pressure builds
  • Persistent ticking at idle suggesting chain guide or tensioner wear
  • Check engine light with cam timing correlation codes (P0016 / P0017 / P0014)
  • Rough running or misfires if chain has skipped

How to check it

Where to look. Front of the J20A/J24B engine, timing chain on the right side of the block behind the cam cover

Insist on a cold start. Any rattle on first start-up warrants a workshop inspection of chain stretch and tensioner condition. Check the service history for oil change regularity — a 2.0L/2.4L engine running on old oil is the primary timing chain failure scenario. Budget for chain replacement if the car is over 130,000 km with no documented chain service.

Parts involved: Timing chain.

What it costs to put right

≈A$1,100 to ≈A$2,580 at independent workshop rates, shown as an approximate guide in Australian dollars. That is for this job on its own, not for the car.

An estimate, converted to Australian dollars, for the repair as normally carried out. What a specific car costs depends on which part has failed and what it damaged on the way — treat this as the floor for a negotiation, not a quote.

Ask the seller

  • “Has the timing chain or tensioner been replaced?”
  • “Is there any rattle on cold start?”
  • “How regularly has the oil been changed and do you have receipts?”

Now check the Suzuki Grand Vitara you are actually looking at

Everything above is true of the model, and it is free. What it does not tell you is whether THIS car still has money owing on it, has been written off or reported stolen, what kms it showed in past sale ads, whether it has had accident repair claims and what it is worth today. That comes from the official records for that plate. Enter the plate and its state for the A$17.90 Vehicle Check, or the full history from A$24.99.

Where this comes from

The failure described above is documented in published sources — owner forums, technical service bulletins, recall notices and workshop write-ups — held in our fault database. The inspection instructions and the cost estimate are KickTyres’ own interpretation of them, and it is a starting point for an inspection rather than a manufacturer statement.

Suzuki Grand Vitara buyer questions

Is j20a / j24b timing chain stretch serious on a Suzuki Grand Vitara?

We rate it major and common on the Suzuki Grand Vitara. The second-generation Grand Vitara (2005-2015) uses the J20A 2.0L or J24B 2.4L four-cylinder petrol engines, both chain-driven interference designs. The chain tensioner and plastic guide system wears gradually and is sensitive to oil change frequency. On examples that have had extended service intervals or have exceeded 150,000 km, the chain elongates enough to produce a rattle on cold start-up. A jumped tooth on these interference engines bends the valves, turning a preventable maintenance job into an engine rebuild costing more than the car's value. Multiple Grand Vitara owner forums in Australian cite this as the single most important mechanical item to verify at purchase.

How much does it cost to fix on a Suzuki Grand Vitara?

≈A$1,100 to ≈A$2,580 at independent workshop rates, shown as an approximate guide in Australian dollars. That figure is for this job on its own. A car showing the symptoms on this page is usually worth either walking away from or negotiating down by at least the repair figure.

Which Suzuki Grand Vitara years are affected?

Our research records this fault on the 2005–2015 Suzuki Grand Vitara. Build dates move around, especially on imported cars, so treat the range as the years to look hardest at rather than a guarantee either way. The official records tell you the exact build and first registration date for the car in front of you.

How do I check for it before I buy?

Insist on a cold start. Any rattle on first start-up warrants a workshop inspection of chain stretch and tensioner condition. Check the service history for oil change regularity — a 2.0L/2.4L engine running on old oil is the primary timing chain failure scenario. Budget for chain replacement if the car is over 130,000 km with no documented chain service. Look here: Front of the J20A/J24B engine, timing chain on the right side of the block behind the cam cover