Skip to content
KickTyres
MajorCommonCooling

Alfa Romeo Giulia: Coolant leaks - water pump, thermostat housing and plastic bleeder screws (2.0 turbo)

Coolant leaks - water pump, thermostat housing and plastic bleeder screws (2.0 turbo) is a common cooling fault on the Alfa Romeo Giulia on the 2017 onward cars, and we rate it major. Putting it right costs $300 to $2,500 at New Zealand independent workshop rates. Below is what goes wrong, the symptoms to notice on a test drive, where to look, and what to ask the seller before you hand over any money. It is one of 13 documented faults on the Alfa Romeo Giulia.

Vehicle
Alfa Romeo Giulia
Engine
2.0L
Years
2017 onward
Fuel
petrol
System
Cooling

This page covers the Alfa Romeo Giulia as a model. Some faults only affect particular engines or build years — enter a plate below to narrow the list to one car.

All Alfa Romeo Giulia faults13 documented faults on this model

What you are looking at

An annotated photograph of an automotive engine thermostat identifying the wax capsule and both disc valves.Example of the part — not this vehicle

A double-valve engine thermostat, labelled: the wax capsule is what sticks.

Dougsim · CC BY-SA 3.0 · Wikimedia Commons

What goes wrong

The 2.0-litre turbo four develops coolant leaks from several known points: the water pump housing/gasket (failures reported from around 70,000-100,000 km), the thermostat housing, brittle plastic bleeder screws on the coolant hoses, and the turbo coolant feed pipe collar. A snapped bleeder screw can dump coolant suddenly, so a small leak should not be ignored. The system needs a specific purple OAT coolant (MS-12106 spec) - the wrong coolant causes further damage.

What you would notice

  • Low coolant warning that keeps returning
  • Sweet coolant smell after a drive
  • Drips or dried pink/purple residue under the front of the engine
  • Whining noise from the pump area
  • Slow temperature rise or overheating

How to check it

Where to look. Front of the engine - water pump and thermostat on the 2.0 GME engine, plastic bleeder screws on the upper coolant hoses

With the engine cold, check the coolant level and colour in the expansion tank (should be purple OAT, not green or brown). Shine a torch around the water pump, thermostat housing and hose junctions looking for crusty dried-coolant residue. After the test drive, look underneath for fresh drips. Ask for invoices showing any cooling-system work.

Parts involved: Thermostat, Water pump, Turbocharger.

What it costs to put right

$300 to $2,500 at New Zealand independent workshop rates. That is for this job on its own, not for the car.

An estimate, in NZD, for the repair as normally carried out. What a specific car costs depends on which part has failed and what it damaged on the way — treat this as the floor for a negotiation, not a quote.

Ask the seller

  • “Has the water pump or thermostat ever been replaced?”
  • “Has the car ever overheated or lost coolant?”
  • “What coolant has been used for top-ups?”

Now check the Alfa Romeo Giulia you are actually looking at

Everything above is true of the model, and it is free. What it does not tell you is whether THIS car has been looked after: its odometer history and whether the reading has ever gone backwards, whether there is still money owing on it, whether it has been reported stolen, how many owners it has had and what it is really worth today. That comes from the official records for that plate. Enter the plate for the free details, or get the full history and a market valuation from $13.49.

Not sure what you would be paying for? See what a full KickTyres check includes.

Where this comes from

The failure described above is documented in the sources below. The inspection instructions and the cost estimate are KickTyres’ own interpretation of them.

  • Go-Parts 2017-2024 Alfa Romeo Giulia & Stelvio water pump failure and replacement guide
  • Alfa Owner forum thread 'P026A - Secondary Coolant Leak'
  • Giulia Forums thread 'Water pump replacement and other things'

Alfa Romeo Giulia buyer questions

Is coolant leaks - water pump, thermostat housing and plastic bleeder screws (2.0 turbo) serious on a Alfa Romeo Giulia?

We rate it major and common on the Alfa Romeo Giulia. The 2.0-litre turbo four develops coolant leaks from several known points: the water pump housing/gasket (failures reported from around 70,000-100,000 km), the thermostat housing, brittle plastic bleeder screws on the coolant hoses, and the turbo coolant feed pipe collar. A snapped bleeder screw can dump coolant suddenly, so a small leak should not be ignored. The system needs a specific purple OAT coolant (MS-12106 spec) - the wrong coolant causes further damage.

How much does it cost to fix on a Alfa Romeo Giulia?

$300 to $2,500 at New Zealand independent workshop rates. That figure is for this job on its own. A car showing the symptoms on this page is usually worth either walking away from or negotiating down by at least the repair figure.

Which Alfa Romeo Giulia years are affected?

Our research records this fault on the 2017 onward Alfa Romeo Giulia. Build dates move around, especially on imported cars, so treat the range as the years to look hardest at rather than a guarantee either way. The official records tell you the exact build and first registration date for the car in front of you.

How do I check for it before I buy?

With the engine cold, check the coolant level and colour in the expansion tank (should be purple OAT, not green or brown). Shine a torch around the water pump, thermostat housing and hose junctions looking for crusty dried-coolant residue. After the test drive, look underneath for fresh drips. Ask for invoices showing any cooling-system work. Look here: Front of the engine - water pump and thermostat on the 2.0 GME engine, plastic bleeder screws on the upper coolant hoses