Skip to content
MajorCommonTransmission

Peugeot 3008: EGS Automated Gearbox Actuator Motor Failure

EGS Automated Gearbox Actuator Motor Failure is a common transmission fault on the Peugeot 3008 on the 2009–2016 cars, and we rate it major. Putting it right costs $2,200 to $5,500 at New Zealand independent workshop rates. Below is what goes wrong, the symptoms to notice on a test drive, where to look, and what to ask the seller before you hand over any money. It is one of 23 documented faults on the Peugeot 3008.

Vehicle
Peugeot 3008
Years
2009–2016
Gearbox
auto
System
Transmission

This page covers the Peugeot 3008 as a model. Some faults only affect particular engines or build years — enter a plate below to narrow the list to one car.

All Peugeot 3008 faults23 documented faults on this model

What you are looking at

No photograph available

We do not hold a verified photograph of the Clutch yet. We would rather show none than show a picture of a different part.

What goes wrong

The 3008 T8 EGS (Efficient Gearshift System) is a single-clutch automated manual transmission that uses an electro-hydraulic actuator assembly to select gears and engage the clutch automatically without driver input. The actuator electric motor and its position sensors are prone to failure from wear and moisture ingress, causing the gearbox to refuse gear engagement and display a gearbox fault warning on the instrument cluster. The fault manifests as the car being stranded in neutral with Auto mode unavailable, or producing violent lurching and stalling during low-speed manoeuvring. The actuator assembly is a proprietary PSA unit with limited aftermarket supply in NZ and AU, and replacement requires electronic software adaptation by PSA-capable diagnostic equipment. The EGS also inherits mechanical jerkiness characteristic of single-clutch AMT at low speeds even when functioning correctly — this is normal behaviour not a fault.

What you would notice

  • Gearbox fault warning light on dashboard
  • Car stuck in neutral with no gear engagement possible
  • Violent jerk or stall when pulling away from rest
  • Long delay or clunk between gear changes
  • Refusal to engage drive from a standstill after stop-start

How to check it

Where to look. EGS actuator assembly mounted on top of transmission unit, accessible from above after removal of air filter housing

Test-drive specifically in stop-start traffic at low speed and pull away from rest at least ten times. Engage reverse multiple times. Select manual mode and verify each gear engages cleanly without refusal. Query whether gearbox actuator or clutch has been replaced. Check transmission fluid level if the dipstick is accessible. If a workshop inspection is possible: OBD scan for transmission fault codes, especially actuator motor and position sensor codes.

Parts involved: Clutch.

What it costs to put right

$2,200 to $5,500 at New Zealand independent workshop rates. That is for this job on its own, not for the car.

An estimate, in NZD, for the repair as normally carried out. What a specific car costs depends on which part has failed and what it damaged on the way — treat this as the floor for a negotiation, not a quote.

Ask the seller

  • “Has the EGS gearbox actuator or clutch been replaced and at what mileage?”
  • “Has the car shown any gearbox warning lights or refused to engage gears?”
  • “Does the car pull away smoothly in low-speed stop-start urban traffic?”

Now check the Peugeot 3008 you are actually looking at

Everything above is true of the model, and it is free. What it does not tell you is whether THIS car has been looked after: its odometer history and whether the reading has ever gone backwards, whether there is still money owing on it, whether it has been reported stolen, how many owners it has had and what it is really worth today. That comes from the official records for that plate. Enter the plate for the free details, or get the full history and a market valuation from $13.49.

Not sure what you would be paying for? See what a full KickTyres check includes.

Where this comes from

The failure described above is documented in published sources — owner forums, technical service bulletins, recall notices and workshop write-ups — held in our fault database. The inspection instructions and the cost estimate are KickTyres’ own interpretation of them, and it is a starting point for an inspection rather than a manufacturer statement.

Peugeot 3008 buyer questions

Is egs automated gearbox actuator motor failure serious on a Peugeot 3008?

We rate it major and common on the Peugeot 3008. The 3008 T8 EGS (Efficient Gearshift System) is a single-clutch automated manual transmission that uses an electro-hydraulic actuator assembly to select gears and engage the clutch automatically without driver input. The actuator electric motor and its position sensors are prone to failure from wear and moisture ingress, causing the gearbox to refuse gear engagement and display a gearbox fault warning on the instrument cluster. The fault manifests as the car being stranded in neutral with Auto mode unavailable, or producing violent lurching and stalling during low-speed manoeuvring. The actuator assembly is a proprietary PSA unit with limited aftermarket supply in NZ and AU, and replacement requires electronic software adaptation by PSA-capable diagnostic equipment. The EGS also inherits mechanical jerkiness characteristic of single-clutch AMT at low speeds even when functioning correctly — this is normal behaviour not a fault.

How much does it cost to fix on a Peugeot 3008?

$2,200 to $5,500 at New Zealand independent workshop rates. That figure is for this job on its own. A car showing the symptoms on this page is usually worth either walking away from or negotiating down by at least the repair figure.

Which Peugeot 3008 years are affected?

Our research records this fault on the 2009–2016 Peugeot 3008. Build dates move around, especially on imported cars, so treat the range as the years to look hardest at rather than a guarantee either way. The official records tell you the exact build and first registration date for the car in front of you.

How do I check for it before I buy?

Test-drive specifically in stop-start traffic at low speed and pull away from rest at least ten times. Engage reverse multiple times. Select manual mode and verify each gear engages cleanly without refusal. Query whether gearbox actuator or clutch has been replaced. Check transmission fluid level if the dipstick is accessible. If a workshop inspection is possible: OBD scan for transmission fault codes, especially actuator motor and position sensor codes. Look here: EGS actuator assembly mounted on top of transmission unit, accessible from above after removal of air filter housing