Skip to content
MajorCommonTransmission

Ford Ranger: 6R80 auto torque converter shudder (PX 2.2 / 3.2 diesel)

6R80 auto torque converter shudder (PX 2.2 / 3.2 diesel) is a common transmission fault on the Ford Ranger on the 2011–2022 cars, and we rate it major. Putting it right costs ≈A$1,660 to ≈A$5,980 at independent workshop rates, shown as an approximate guide in Australian dollars. Below is what goes wrong, the symptoms to notice on a test drive, where to look, and what to ask the seller before you hand over any money. It is one of 49 documented faults on the Ford Ranger.

Vehicle
Ford Ranger
Engine
2.2L / 3.2L
Years
2011–2022
Fuel
diesel
Gearbox
auto
System
Transmission

This page covers the Ford Ranger as a model. Some faults only affect particular engines or build years — enter a plate below to narrow the list to one car.

All Ford Ranger faults49 documented faults on this model

What you are looking at

A cutaway automatic transmission torque converter showing the internal turbine and stator.Example of the part — not this vehicle

A torque converter, sectioned. The lock-up clutch inside is what shudders.

No machine-readable author provided. BerndB~commonswiki assumed (based on copyright claims). · CC BY-SA 3.0 · Wikimedia Commons

What goes wrong

The Ford 6R80 six-speed automatic transmission paired with both 2.2L and 3.2L diesel Rangers is prone to torque converter clutch (TCC) shudder, typically experienced as a rhythmic vibration or flutter at light throttle between 60 and 100 km/h as the converter lock-up clutch engages. The root cause is friction material degradation on the TCC piston combined with transmission fluid contamination from worn clutch material. Ford released a revised converter specification and a mandatory fluid flush using Motorcraft MERCON LV under service action. In advanced cases the complete torque converter requires replacement. Left unaddressed, metallic debris from the friction material accelerates wear on valve body solenoids and the transmission pump.

What you would notice

  • Vibration or flutter sensation at 60-100 km/h under light throttle
  • Shudder disappears when accelerator is pressed firmly
  • Hesitation when accelerator is held steady at highway cruise speed
  • Transmission fluid that is dark brown or carries a burnt odour

How to check it

Where to look. Torque converter between engine and transmission bellhousing; transmission fluid pan on underside of vehicle behind engine sump

  1. Test drive at steady 70-80 km/h on light throttle and note any flutter or vibration through the floor or seat.

  2. Check transmission fluid colour and level on the dipstick — should be pink or red, not brown.

  3. Inspect the fluid on a white cloth for metallic particles.

  4. Scan transmission module for P0741 or P0742 TCC performance codes.

Parts involved: Torque converter.

What it costs to put right

≈A$1,660 to ≈A$5,980 at independent workshop rates, shown as an approximate guide in Australian dollars. That is for this job on its own, not for the car.

An estimate, converted to Australian dollars, for the repair as normally carried out. What a specific car costs depends on which part has failed and what it damaged on the way — treat this as the floor for a negotiation, not a quote.

Ask the seller

  • “Has the transmission fluid ever been flushed or replaced with Motorcraft MERCON LV?”
  • “Has the torque converter been replaced or serviced under any Ford service action?”
  • “Have you noticed any vibration on the highway when holding a steady light throttle?”

Now check the Ford Ranger you are actually looking at

Everything above is true of the model, and it is free. What it does not tell you is whether THIS car still has money owing on it, has been written off or reported stolen, what kms it showed in past sale ads, whether it has had accident repair claims and what it is worth today. That comes from the official records for that plate. Enter the plate and its state for the A$17.90 Vehicle Check, or the full history from A$24.99.

Where this comes from

The failure described above is documented in published sources — owner forums, technical service bulletins, recall notices and workshop write-ups — held in our fault database. The inspection instructions and the cost estimate are KickTyres’ own interpretation of them, and it is a starting point for an inspection rather than a manufacturer statement.

Ford Ranger buyer questions

Is 6r80 auto torque converter shudder (px 2.2 / 3.2 diesel) serious on a Ford Ranger?

We rate it major and common on the Ford Ranger. The Ford 6R80 six-speed automatic transmission paired with both 2.2L and 3.2L diesel Rangers is prone to torque converter clutch (TCC) shudder, typically experienced as a rhythmic vibration or flutter at light throttle between 60 and 100 km/h as the converter lock-up clutch engages. The root cause is friction material degradation on the TCC piston combined with transmission fluid contamination from worn clutch material. Ford released a revised converter specification and a mandatory fluid flush using Motorcraft MERCON LV under service action. In advanced cases the complete torque converter requires replacement. Left unaddressed, metallic debris from the friction material accelerates wear on valve body solenoids and the transmission pump.

How much does it cost to fix on a Ford Ranger?

≈A$1,660 to ≈A$5,980 at independent workshop rates, shown as an approximate guide in Australian dollars. That figure is for this job on its own. A car showing the symptoms on this page is usually worth either walking away from or negotiating down by at least the repair figure.

Which Ford Ranger years are affected?

Our research records this fault on the 2011–2022 Ford Ranger. Build dates move around, especially on imported cars, so treat the range as the years to look hardest at rather than a guarantee either way. The official records tell you the exact build and first registration date for the car in front of you.

How do I check for it before I buy?

Test drive at steady 70-80 km/h on light throttle and note any flutter or vibration through the floor or seat. Check transmission fluid colour and level on the dipstick — should be pink or red, not brown. Inspect the fluid on a white cloth for metallic particles. Scan transmission module for P0741 or P0742 TCC performance codes. Look here: Torque converter between engine and transmission bellhousing; transmission fluid pan on underside of vehicle behind engine sump