Skip to content
MajorVery commonTransmission

Holden Commodore: 6L80 Torque Converter Shudder on Light Throttle

6L80 Torque Converter Shudder on Light Throttle is a very common transmission fault on the Holden Commodore on the 2006–2017 cars, and we rate it major. Putting it right costs ≈A$230 to ≈A$5,060 at independent workshop rates, shown as an approximate guide in Australian dollars. Below is what goes wrong, the symptoms to notice on a test drive, where to look, and what to ask the seller before you hand over any money. It is one of 55 documented faults on the Holden Commodore.

Vehicle
Holden Commodore
Years
2006–2017
Fuel
petrol
Gearbox
auto
System
Transmission

This page covers the Holden Commodore as a model. Some faults only affect particular engines or build years — enter a plate below to narrow the list to one car.

All Holden Commodore faults55 documented faults on this model

What you are looking at

A cutaway automatic transmission torque converter showing the internal turbine and stator.Example of the part — not this vehicle

A torque converter, sectioned. The lock-up clutch inside is what shudders.

No machine-readable author provided. BerndB~commonswiki assumed (based on copyright claims). · CC BY-SA 3.0 · Wikimedia Commons

What goes wrong

The 6-speed Hydra-Matic 6L80 automatic transmission paired with V8 and V6 VE and VF Commodores is prone to torque converter lock-up clutch shudder. The shudder manifests as a vibration or judder during steady light-throttle acceleration between approximately 40 and 70 km/h when the converter is partially locked up. It is most pronounced on flat roads at light load in 4th through 6th gear and disappears under heavy acceleration or engine braking. The primary cause is degraded or incorrect transmission fluid breaking down the friction modifier film on the lock-up clutch facing. A full drain-and-fill with fresh Dexron VI specification fluid often reduces symptoms significantly. Persistent shudder after fluid service indicates worn lock-up clutch material requiring torque converter replacement.

What you would notice

  • Vibration or shudder at light throttle between 40 and 70 km/h
  • Shudder disappears under hard acceleration or coasting
  • Judder felt through the floor and seat during steady highway cruising
  • Symptom worse with old or overdue transmission fluid

How to check it

Where to look. Inside the 6L80 transmission bellhousing — torque converter lock-up clutch friction material

  1. Test drive on a flat road holding steady 50 to 60 km/h at very light throttle to feel for judder or vibration through the floor and seat.

  2. Vary speed slightly to identify the lock-up engagement zone.

  3. Check transmission fluid condition via dipstick if accessible — brown or burnt-smelling fluid is a contributing factor.

  4. Ask when the last transmission fluid service was carried out and whether a fluid flush or drain-and-fill has been performed.

Parts involved: Torque converter.

What it costs to put right

≈A$230 to ≈A$5,060 at independent workshop rates, shown as an approximate guide in Australian dollars. That is for this job on its own, not for the car.

An estimate, converted to Australian dollars, for the repair as normally carried out. What a specific car costs depends on which part has failed and what it damaged on the way — treat this as the floor for a negotiation, not a quote.

Ask the seller

  • “Has the transmission fluid ever been changed or flushed?”
  • “Does the car vibrate or shudder at steady highway speeds?”
  • “Has the torque converter or transmission been serviced or rebuilt?”
  • “Has a transmission shudder been previously diagnosed by a workshop?”

Now check the Holden Commodore you are actually looking at

Everything above is true of the model, and it is free. What it does not tell you is whether THIS car still has money owing on it, has been written off or reported stolen, what kms it showed in past sale ads, whether it has had accident repair claims and what it is worth today. That comes from the official records for that plate. Enter the plate and its state for the A$17.90 Vehicle Check, or the full history from A$24.99.

Where this comes from

The failure described above is documented in published sources — owner forums, technical service bulletins, recall notices and workshop write-ups — held in our fault database. The inspection instructions and the cost estimate are KickTyres’ own interpretation of them, and it is a starting point for an inspection rather than a manufacturer statement.

Holden Commodore buyer questions

Is 6l80 torque converter shudder on light throttle serious on a Holden Commodore?

We rate it major and very common on the Holden Commodore. The 6-speed Hydra-Matic 6L80 automatic transmission paired with V8 and V6 VE and VF Commodores is prone to torque converter lock-up clutch shudder. The shudder manifests as a vibration or judder during steady light-throttle acceleration between approximately 40 and 70 km/h when the converter is partially locked up. It is most pronounced on flat roads at light load in 4th through 6th gear and disappears under heavy acceleration or engine braking. The primary cause is degraded or incorrect transmission fluid breaking down the friction modifier film on the lock-up clutch facing. A full drain-and-fill with fresh Dexron VI specification fluid often reduces symptoms significantly. Persistent shudder after fluid service indicates worn lock-up clutch material requiring torque converter replacement.

How much does it cost to fix on a Holden Commodore?

≈A$230 to ≈A$5,060 at independent workshop rates, shown as an approximate guide in Australian dollars. That figure is for this job on its own. A car showing the symptoms on this page is usually worth either walking away from or negotiating down by at least the repair figure.

Which Holden Commodore years are affected?

Our research records this fault on the 2006–2017 Holden Commodore. Build dates move around, especially on imported cars, so treat the range as the years to look hardest at rather than a guarantee either way. The official records tell you the exact build and first registration date for the car in front of you.

How do I check for it before I buy?

Test drive on a flat road holding steady 50 to 60 km/h at very light throttle to feel for judder or vibration through the floor and seat. Vary speed slightly to identify the lock-up engagement zone. Check transmission fluid condition via dipstick if accessible — brown or burnt-smelling fluid is a contributing factor. Ask when the last transmission fluid service was carried out and whether a fluid flush or drain-and-fill has been performed. Look here: Inside the 6L80 transmission bellhousing — torque converter lock-up clutch friction material