Toyota Auris: common faults & what to check
Thinking about buying a used Toyota Auris (2006–2018) in Australia? We've documented 5 known faults for this model spanning engine, electrical, and transmission. Each researched and verified before it's published. The most serious issues here are rated critical. Every one is listed below with its symptoms and repair cost, and each has its own page with where to look and what to ask the seller. Free, no account needed.
Check this exact Toyota Auris
- Money owing
- Written off
- Accident claims
- Odometer history
5
Critical
≈A$370–4,140
18
Which Toyota Auris are you looking at?
Petrol
2012–2018E180E1801.5 petrolPetrolSee faults & what to checkKickTyres illustration, not a photograph.
2012–2018E180E1801.8 petrolPetrolSee faults & what to checkKickTyres illustration, not a photograph.Hybrid
2012–2018E180E1801.8 hybridHybridSee faults & what to checkKickTyres illustration, not a photograph.Now narrow it to the engine
Start your free check on this Toyota Auris
Pick the engine above first: the Auris came with 2, and without it the report has to show all of their faults. Pick the engine
Can't confirm for this car
Toyota Auris
Nothing has been narrowed yet, so nothing below is a claim about a particular car. Pick a year and an engine to see which faults apply.
Tell us the engine, or check the engine code on the car, before relying on this.
matched on no vehicle context
What to look out for
Serious issue
Arrive for a stone-cold start.
2ZR-FXE EGR/intake clogging, oil consumption and head gasket failure (Auris hybrid = Prius Gen 3 drivetrain)
The Auris hybrid uses the third-generation Prius 1.8 2ZR-FXE drivetrain and inherits its best-known failure chain: the EGR cooler and intake manifold passages clog with carbon, early engines (roughly 2012-2014 build) burn oil due to poor piston ring design (Toyota covers the repair; the US ZE7 warranty extension never applied to Australia/JDM cars), and the combination is widely blamed for head gasket failure - classically felt as a rough shake or misfire for a second or two when the engine kicks in after EV running. Toyota Owners Club Auris forums carry multiple dedicated threads on exactly this EGR/head gasket/oil consumption trio. An EGR/intake clean every 80-100,000 km is cheap insurance; a head gasket left misfiring can hydrolock the engine.
What you would notice
Costly issue
On the test drive, watch the energy screen: a healthy pack charges and discharges smoothly, a dying one bounces between extremes within minutes.
Hybrid traction battery (NiMH) degradation and end-of-life failure
The Auris hybrid's nickel-metal-hydride traction battery is the same technology as the Gen 3 Prius pack and degrades the same way: individual modules drift out of balance with age (typically 10-15 years or 150,000-250,000 km), eventually triggering the red triangle warning and P0A80 code, with the car leaning on the petrol engine and economy collapsing. Australia has a mature replacement market: reconditioned exchange packs run roughly $1,800-$3,400 depending on warranty length, new-cell packs from specialists like Infinitev around $2,000-$4,500 fitted. Toyota's battery warranty only ever covered Australian-delivered or Toyota-certified cars, so JDM imports carry the full cost.
What you would notice
Costly issue
Drive the car from cold: shudder is usually worst in the first minutes.
Super CVT-i / Multidrive shudder and hesitation from neglected fluid (JDM petrol CVT)
Japanese-market Auris E150 and E180 petrols came almost exclusively with Toyota's belt-type CVT (K310/K311 family), and like every Toyota CVT of the era it suffers shudder, hesitation and failure to take up drive smoothly when the special CVT fluid degrades - a near certainty on a JDM import with no service history, since Toyota Japan marketed the fluid as long-life. Owner communities list CVT shudder among the most common Auris complaints, sometimes compounded by software calibration on the E180. A genuine-fluid CVT service often fixes early shudder; worn pulleys or belt mean a used transmission. Australian workshops recommend servicing every 40,000 km with the correct Toyota CVT fluid only.
What you would notice
All 5 documented issues
2 rated criticalDepends on which engine this Toyota Auris has: 5 issues
Engine, transmission & cooling
012ZR-FXE EGR/intake clogging, oil consumption and head gasket failure (Auris hybrid = Prius Gen 3 drivetrain)
Can't confirm for this car02Sticky accelerator pedal / floor mat entrapment recall era (E150, 2006-2010 build)
Can't confirm for this car
Can't confirm for this car
The Auris E150 was one of the eight European models in Toyota's January 2010 sticky accelerator pedal recall, covering cars built from October 2006 to early January 2010: the CTS-made pedal mechanism could wear and become slow to return or stick partially depressed, and the parallel floor-mat entrapment campaign covered unsecured mats trapping the pedal. Recalled cars had a precision steel reinforcement shim fitted free of charge. Important for Australian buyers: Japanese-market Auris used a different Denso pedal and were not recalled, so this mainly matters for UK-sourced imports and any car running cheap aftermarket floor mats. On any Auris of this era, confirm the recall status and never stack floor mats.
Symptoms to notice
What to check
Ask the seller
03Super CVT-i / Multidrive shudder and hesitation from neglected fluid (JDM petrol CVT)
Can't confirm for this car04Clutch wear/slip and notchy manual gearbox (E150)
Can't confirm for this car
Can't confirm for this car
UK and European owner data flags clutch slipping and outright clutch failure as one of the recurring Auris E150 complaints, along with baulky or notchy manual gearshifts. Causes range from normal friction wear (accelerated by city driving) to clutch actuator and release bearing problems and old gearbox oil that was never changed. It is a full clutch kit replacement when it goes, and on an import with no service history there is no way to know how much clutch is left except by testing. The gearbox itself is robust once fresh oil is in it.
Symptoms to notice
What to check
Ask the seller
Toyota Auris service schedule
Second Generation (E180) · 2012–2018 · 1.8L (2ZR-FAE) - GX/GLX trim
Due by distance
- 100,000 km
A full transmission fluid service here helps the CVT unit last.
- 150,000 km
Keep an eye on the ignition coils and spark plugs so it idles smoothly and uses less fuel.
- 200,000 km
Assess the suspension bushings and struts, which usually reach their natural limit about now.
Second Generation (E180) · 2012–2018 · 1.8L (2ZR-FXE) - Hybrid/GX Hybrid trim
Due by distance
- 100,000 km
This usually means a full check of the hybrid cooling system and the usual fluid changes.
- 150,000 km
Review the spark plugs, and make sure the hybrid battery cooling fan intake has been kept free of dust.
- 200,000 km
Time to flush the cooling system and check the drive belt tensioner.
Second Generation (E180) · 2012–2018 · 1.4L (1ND-TV) - D-4D Diesel trim
Due by distance
- 100,000 km
Check the suspension bushes in full, along with the condition of the turbocharger actuator.
- 150,000 km
Check the alternator and the state of the fuel injectors.
- 200,000 km
Cooling system parts such as the water pump get assessed for how much life they have left.
First Generation (E150) · 2009–2012 · 1.8L (2ZR-FAE) - Valvematic Performance trim
Due by distance
- 100,000 km
Check the drive belt tensioner and the spark plugs so the Valvematic system works at its best.
- 150,000 km
Review the radiator and coolant hoses so the engine keeps a steady temperature.
- 200,000 km
Have a professional check the engine mounts, as vibration gets more noticeable as the rubber ages.
First Generation (E150) · 2006–2012 · 1.5L (1NZ-FE) - Standard/Entry trim
Due by distance
- 100,000 km
Flush the transmission fluid and check the condition of the serpentine belt.
- 150,000 km
Suspension parts such as strut mounts or sway bar links are worth checking to keep the smooth Toyota ride.
- 200,000 km
Have a mechanic you trust assess the oxygen sensors and the engine generally so fuel use stays low.
First Generation (E150) · 2006–2012 · 1.8L (2ZR-FE) - GX/GL trim
Due by distance
- 100,000 km
Time for a thorough check of the serpentine belt and the cooling system hoses.
- 150,000 km
Good time to check the suspension bushings and shock absorbers for perishing.
- 200,000 km
Review the spark plugs and make sure the fuel system has been kept clean.
Toyota Auris faults in detail
Other Toyota models
Toyota Auris buyer questions
Is the Toyota Auris reliable?
Like any used car, it depends on the specific example and its service history. Across the 5 documented faults for the Toyota Auris, the recurring problem areas are engine, electrical, and transmission. A Toyota Auris with a full service history and no signs of the issues listed on this page can be a sound buy but each one needs to be checked individually before you commit.
What are the most common problems with a used Toyota Auris?
We've catalogued 5 known faults for the Toyota Auris, covering engine, electrical, and transmission. All 5 are written out in full on this page, with the symptoms to notice, what to inspect, and typical repair costs for each. Free to read, no account needed.
How much do repairs cost on a Toyota Auris?
Most single repairs on the Toyota Auris fall between ≈A$370–4,140 at independent-workshop rates (an approximate guide in Australian dollars). Some of the 5 documented faults cost less and a few cost considerably more, and no one car needs them all. Knowing which ones to look for before you view is what lets you negotiate the price down or walk away.
Should I get a pre-purchase inspection on a Toyota Auris?
Yes. A Toyota Auris inspection focused on its known weak points is the single best way to avoid an expensive mistake. KickTyres gives you a guided, model-specific inspection with AI photo analysis from A$28.90, far less than the cost of missing one of the faults on this page. For a big purchase, a mechanic's pre-purchase inspection on the car you settle on is still worth it.