Peugeot 2008 A94: common faults & what to check
The A94 is the Peugeot 2008 built 2013–2020. It was sold here with the 1.2 turbo petrol. Of the 6 faults documented for the 2008, 3 apply to this generation, each with its symptoms, what to inspect and a typical repair cost. Free, no account needed.
Check this exact Peugeot 2008
- Odometer history
- Money owing
- Reported stolen
- Ownership history
6
Critical
$300–$1,500
4
You're looking at the A94 · 1.2 turbo petrol
Now narrow it to the engine
A 2013 Peugeot 2008 is the A94 generation (2013 to 2020).
Start your free check on this Peugeot 2008
Can't confirm for this car
Peugeot 2008 · 2013
Narrowed to the year. No engine is recorded for this vehicle. Pick an engine to see which faults apply.
Tell us the engine, or check the engine code on the car, before relying on this.
- No engine is recorded for this vehicle.
matched on year only
What to look out for
Common issue
Cycle through the screen menus, adjust the climate and audio, and pair a phone to check the screen responds without freezing.
Touchscreen and reversing/parking sensor glitches
The A94 2008's central touchscreen (which also controls climate and audio) is prone to freezing, blank screens and random reboots, and the reversing/park-assist sensors throw false beeps or drop out. These are usually software/connector faults rather than mechanical, but a dead screen means no climate control adjustment and can be an expensive unit to replace.
What you would notice
See all 3 issues for this one
Electrical
01Touchscreen and reversing/parking sensor glitches
The A94 2008's central touchscreen (which also controls climate and audio) is prone to freezing, blank screens and random reboots, and the reversing/park-assist sensors throw false beeps or drop out. These are usually software/connector faults rather than mechanical, but a dead screen means no climate control adjustment and can be an expensive unit to replace.
Symptoms to notice
What to check
Ask the seller
Depends on the exact engine — 2 more
Engine, transmission & cooling
011.2 PureTech wet timing belt breaks up and starves the engine of oil
Can't confirm for this car02Plastic coolant housing / thermostat leaks on the 1.2 PureTech
Can't confirm for this car
Can't confirm for this car
The EB2 three-cylinder uses plastic coolant outlet and thermostat housings that go brittle with heat cycling and start weeping, plus the small stop-start pump and hoses can seep. Slow coolant loss leads to overheating and, if ignored, to head-gasket damage on an engine that is already sensitive to oil condition. It is usually a cheap fix if caught early.
Example of the part — not this vehicleA double-valve engine thermostat, labelled: the wax capsule is what sticks.
Symptoms to notice
What to check
Ask the seller
Other Peugeot 2008 engines and years
Engine, transmission & cooling
Electrical
01e-2008 12V battery drain and charging faults
Does not apply
Does not apply
The electric e-2008 shares the e-208 platform, and early cars are known for flat 12V auxiliary batteries (the 12V runs the car's computers, not the drive battery) leaving the car dead, plus occasional on-board-charger and charge-flap faults that stop it charging. Most are software/12V-battery issues rather than the expensive traction battery, but a car that will not wake up or charge is unusable. Ask about software updates.
Symptoms to notice
What to check
Ask the seller
Body, brakes, suspension & interior
01i-Cockpit digital dash and infotainment software bugs
Does not apply
Does not apply
The P24 2008 uses a digital instrument cluster and a large touchscreen for almost everything including climate. Owners report screen freezes, blank or flickering digital dials, laggy responses and Apple CarPlay/Android Auto dropouts. These are annoyance-level software faults but the reliance on the screen for climate and key functions makes a glitchy unit a real usability problem.
Symptoms to notice
What to check
Ask the seller
Peugeot 2008 faults in detail
What these repairs cost on other cars
Some of the Peugeot 2008’s documented faults are repairs other models share. Each page lists the documented NZ cost for every model it affects.
Other Peugeot models
Peugeot 2008 buyer questions
Is the Peugeot 2008 reliable?
Like any used car, it depends on the specific example and its service history. Across the 6 documented faults for the Peugeot 2008, the recurring problem areas are engine, electrical, and cooling. A Peugeot 2008 with a full service history and no signs of the issues listed on this page can be a sound buy but each one needs to be checked individually before you commit.
What are the most common problems with a used Peugeot 2008?
We've catalogued 6 known faults for the Peugeot 2008, covering engine, electrical, and cooling. All 6 are written out in full on this page, with the symptoms to notice, what to inspect, and typical repair costs for each. Free to read, no account needed.
How much do repairs cost on a Peugeot 2008?
Most single repairs on the Peugeot 2008 fall between $300–$1,500 at NZ independent-workshop rates. Some of the 6 documented faults cost less and a few cost considerably more, and no one car needs them all. Knowing which ones to look for before you view is what lets you negotiate the price down or walk away.
Should I get a pre-purchase inspection on a Peugeot 2008?
Yes. A Peugeot 2008 inspection focused on its known weak points is the single best way to avoid an expensive mistake. KickTyres gives you a guided, model-specific inspection plus a market valuation and negotiation figure for $24.90 far less than the cost of missing one of the faults on this page.